Lab Imaging System

The Canfield Lab Imaging System is a modular, customizable, computer-controlled photography system designed for research applications.

All systems start with the open architecture Control Module (see below) and can be configured to control a variety of flashes, LED modules and filter wheels for your specific imaging requirements. Build your own, or use Canfield’s imaging expertise to design the perfect system for repeatable imaging of your subject of interest.

request a quote

Control Module
(front) (rear)

Intuitive SDK makes programming a breeze with common
Serial Emulation Software like MatLab, ZOC and VBScript
USB communication to computer
Universal 100-240VAC input
Power switch and indicator (front)
Flash charge status indicators (front)

Supports up to

8 Flashes
6 LED Modules
3 Filter Wheels
2 SYNC IN (from camera/trigger sources)
2 AUX SYNC (assignable to sync 3rd party strobes)

	700M CR-Flash Variable output is automated via the Controller Output range of 2-35 Joules ¼-20 tapped mounting holes on all four sides Accepts 50mm and 2 inch square filters up to 5mm thick
	2100 IntelliFlash Variable output automated via the Controller Output range of 5-105 Joules Mounting bracket
	LED Module Variable output automated via Controller 6500K color temperature ¼-20 tapped mounting hole
	Camera Filter Wheel 5 positions Accepts 43mm circular threaded filters Automated via Controller Enclosed housing with glare reducing Front Baffle ¼-20 tapped holes in the Mounting Bracket Mounting Bracket can be used on any side
	Studio Strobe Filter Wheel 4 positions Accepts 50mm and 2 inch square filters up to 5mm thick Enclosed housing Mounts directly to the front of studio strobe (Picolite) Automated via Controller
	An example of a Lab Imaging System configured for repeatable facial imaging:	request a quote download the SDK download sample code